DeepBlue

Aquarium Supplies

small logo

Controllers & Monitors

 

 

 

PH Controller with Probe
 
Weipro PH-2010~~ $219.90NZD
 

LED Display
Auto Electronic Control
Auto Test PH
Auto Control Co2
Simple Operation
Durable and Reliable
Ideal for Saltwater & Freshwater use

How it works:
This PH controller is used to control PH value of liquids, ponds, aquaria etc. This means that a desired PH value can be set and stabilized.
This PH controller has a probe measuring the PH of liquids, ponds, aquariums etc. A chosen value is memorized in the controller; and when the actual PH of liquids, ponds, aquariums changes, the controller activates an electrical outlet. This outlet can be connected to a random device, eg. an oxygen pump ¡B co2 pump or an electromagnetic valve. Once the memorized value is reached again, the outlet is disconnected and also the device that makes the PH rise or drop.

Temperature Controller with Quartz Heater
 
Weipro MX-1019~~ $129.90NZD
 

An excellent cost effective way to protect your aquarium from heater thermostat failiure.
By setting the temperature on this controller power to the heater will be cut off once a maximum set temperature has been reached.
Max loading of 1000w.
Complete with temperature probe and instructions.

Comes with Quartz Heater

*2 plugs (can connect up to 2 heater)

Atman 200W Crystal Glass Heater~~ $24.90NZD
 
High quality and economical heaters.
Fully submersible with double insulation.
Heater thermostat with easy to use temperature settings.
Easy to read temperature guide.
Automatic shut off and on light.
Suitable for marine and tropical aquariums.
Suitable for tanks 200L or below.
Wavemaker with controller
Wavysea~~ $395NZD

State-of-the-art technology in wave creation for aquariums.

Patented Natural Wave Maker - With Wavysea, you can create the most natural simulation of the ocean waves in your tank without sacificing too much space or money. The secret is in our patented rotating motor. It allows you to create waves in any direction in your tank. The moving head continually rotates back and forth to the coordinates you preset. You can even let it spin 360 degrees over and over again.

The rotating motor is designed to work with your current water pumps including power heads. You select the amount of waves and strength yourself by using your current pump. You an simply use a more powerful pump to increase the water flow.

More Detail and Technical Specs click here

* Wavysea is only offered to New Zealand customer for overseas customer please contacts your local supplier

 
 
Basic Auto Top Off Unit~~ $49.90NZD
 

Basic Automatic top up

Keep a constant water level in your freshwater and saltwater aquariums.
Top up evaporated water automatically.
Suitable for 8-12mm glass
Water level can be adjust between 8-18cm

Does not require any pump or electronic device to run. (Works kind of like a toilet)

•  The top up water container must be above the water level of your sump or main tank.

Auto Top Off Unit with pump and Temperature sensor~~ $209.90NZD
 

The electronic level controller with 2 sensors will automate aquarium water top off. Since safety is our number one concern, we include two float switch sensors with our electronic water level controller. The first float switch sensor triggers the feed pump to maintain the desire water level. The second float switch sensor ensures dependability and offers overflow protection. Our water level controller can also be used to protect pump from running dry. It can be utilized in three ways :
1.In this mode the power supply will turn on if the water level in the sump is low
AND there is enough water in the storage tank. The power supply will turn off if the water level in the sump is high AND there is not enough water in the storage tank.
(View Operation diagram, MODE A-1)
With this set up the power supply will turn on as soon as the water level in the sump drops below the set level. The power supply will turn off if the water level in the sump is high the set level.
(View Operation diagram, MODE A-2)
2.With this set up the power supply will turn off when BOTH sensors detected that the water level is below the minimum level. The power supply will turn on when the water rises the maximum level of any one sensor.
(view Operation diagram, MODE B)
3.The power supply will turn on when the level falls below the minimal level of float sensor 1 and will turn off when water rises the set point of the flow sensor 1. The float sensor 2 acts as a backup sensor in the event the float sensor 1 is stuck. The power supply will turn off if the water level in the sump/tank reaches the maximum level of float sensor 2.
(View Operation diagram, MODE C)

This Unit comes with an Atman At101 pump
350L/H
Watt: 5W

Temperature Sensor and display

Technical Specification:

Model

KL-233 T

Power Supply

AC 220V 50Hz

Environment

Temperature: 0¡ã50¢J, Humidity¡Õ95%

Temp Range

2 watts 0-80¢J

Resolution 0.1¢J
Accuracy ¡Ó 1 ¢J

Dimensions

150mm¡Ñ85mm¡Ñ42mm

Weight

690g

 

Pocket Size TDS Meter~~ $64.90NZD
 

Pocket sized TDS meter is for portable use in a large number of applications including water quality testing for you RODI unit, aquatic cultivation, aquarium water, laboratories, Ionized water, production and drinking of pure water, cleanness of swimming pool water, food processing, hospitals and medical products etc.

Technical Specification:

1.Measuring range:0-1999 PPm(mg/L)
2.Resolution: 1 PPm(mg/L
3.Accuracy: ¡Ó2%F.S
4.Operating Temperature: 0¢J- 50¢J
5.Power Supply: 2¡Ñ3V¡]CR2032 Battery¡^
6.Environment: Humidity: ?95%
7.Display:4-digital LCD
8.Weight:46g
9.Dimension:150mm¡Ñ27mm¡Ñ20mm

 

 

 

 

 

 

 

 

 

 

About Us | Contact Us | ©2005-2007 DeepBlue